Has the vacuum cleaner in your home lost its suction capacity? We’ve outlined how to fix a vacuum cleaner with no suction in detail. Just follow the ropes.
There are different reasons your vacuum cleaner can lose its suction capacity. It could result from a full dustbin, tangled brush bar, blocked airway, clogged filters, or another way, but these are the most common ways your vac cleaner can lose suction.
Maintaining your vacuum cleaner is essential to avoid loss of suction, clogged filter, and any other problem that may arise from your vacuum cleaner. These steps will guide you on How to fix a vacuum cleaner with no suction.
What Causes a Vacuum Cleaner to Lose Suction?
- Full dustbin
- Tangled brush bar
- Blocked airway
- Clogged filters
A vacuum cleaner’s suction indicates how powerful the vacuum cleaner is, while the air volume shows how much air the vacuum cleaner can produce.
The vacuum cleaner uses the suction capacity provided by the fan motor to take in the dirt through the hose or chamber to dispose of it into the dirtbag or canister.
Furthermore, for the vacuum cleaner to work perfectly, it must be free from obstacles, clogged filters, and other sensitive things to function well. Otherwise, the vacuum cleaner would lose suction.
Recommended Post: How to Clean a Vacuum Cleaner that Smells
How to Fix a Vacuum Cleaner With no Suction
Has your vacuum cleaner lost suction? Or it’s not picking up dirt as it should? Or does it stop working? Below are ways to fix your vacuum cleaner with no suction and any other challenge you have with your vacuum cleaner.
Check the Filter
Whenever the filter of your vacuum cleaner is clogged, it can be a significant reason for your vac cleaner’s loss of suction. It is best to start from here.
Most modern vacuum cleaners now come with two filters: motor and allergen filters. The allergen filter is located near the dust bag or canister. In contrast, the motor filter is near the back of the machine before the vacuum cleaner hose.
Each of these filters needs to be correctly cleaned and maintained. Make use of your user manual if you don’t know where to find the filters.
If your vacuum cleaner has a washable filter, you should wash it under a running tap, but if it’s not washable, you might need to replace the old one when it’s clogged. There are a few types of vacuum cleaner filters, and they include:
- Replaceable: The filter requires you to replace them after being clogged to work effectively.
- Self-cleaning: This is relatively easy to use; you only have to twist and shake out the dirt from the filter.
- Washable: The washable ones would save you the cost of buying a new filter after it has been clogged. The washable filter can be washed under the tap. Sometimes, the machine can clean the filter depending on its manufacture. Patiently let it dry for at least 24 hours before fixing it back into the machine.
Clean the Brush Bar
Most vacuum cleaners have a spinning brush bar on the floorhead; the brush bar removes tough dirt from the carpet fibre. They are more useful in homes with pets and on thick carpets.
Hair that gets tangled on the brush bar can slow the function of the vacuum cleaner and affect the vacuum cleaner from turning adequately or spinning.
How do I remove the hair tangled around my brush bar? Get scissors, carefully cut out the tangled hair, and remove all the dirt. Wear a glove while doing this process.
Empty the Dust Canister and Replace the Bag
Always empty the dust canister of your vacuum cleaner to maintain your vac cleaning performance. We have the bagged vacuum and bagless vacuum.
The bagged vacuum doesn’t need to be emptied often like the bagless vacuum. Whenever you notice that your vacuum is beginning to lose suction, check your vacuum bag or canister.
The bagless vacuum should be regularly disposed of as its container is small, particularly the cordless vacuum.
Check the Hose and Tube
The hose and pipe can get clogged with hair and debris if not taken out or adequately cleaned. A blocked hose can cause the vacuum to lose suction. Detach the hose from the vac and check if something is blocking the hose.
You can use a long stick or straight wire to push the dirt outside the hose. Also, you can check the hose to see if it’s torn. A torn hose can cause air leakage, leading to suction loss.
Good Read: How to Check for Vacuum Leaks with Carb Cleaner
How to Fix a Vacuum Cleaner Belt
If your vacuum cleaner seizes to work, most times, this is due to a faulty belt. All you have to do is replace the broken belt. Follow the steps below to fix your vacuum cleaner belt:
- Get a new replacement for the old belt.
- Remove the screw on the bottom panel on the floor head to remove the brush bracket.
- Remove the old vacuum cleaner belt from the brush bracket. It is located near the rear wheels of the vacuum.
- Replace it with the new belt, and screw the bottom panel back as you meet it.
You do not need to rob a bank to replace a vacuum belt. It is cheap and easy to fix.
What to Do if Your Vacuum Cleaner Still Does Not Work?
If your vacuum doesn’t respond after the steps above, we suggest you return it to the manufacturer. The best way to have a long-lasting vacuum cleaner is through proper maintenance. You need to maintain your vacuum correctly to get your desired cleaning result.
Lack of care leads to vacuum damage, breakdown, malfunction even loss of suction. If you want your vacuum cleaner to last longer, then you must:
- Clean the filter regularly
- Do not overfill the dust bag or canister with too much garbage.
- Take proper care of the brush bar and remove tangling hair around it.
Conclusion
Finally, these maintenance tips would save you a lot of money and teach you how to fix a vacuum cleaner with no suction, what causes a vacuum cleaner to lose suction, and how to fix a vacuum cleaner belt.
If the steps above don’t work, you can return them to the manufacturer. If you think the steps above might be stressful, you can as well take it to the repair shop. But it’s going to cost you quite a lot of money.
1 thought on “How to Fix a Vacuum Cleaner With no Suction”