Most people don’t know how to use a hoover carpet cleaner or how easy it is to use a Hoover cleaner. You do not need a professional cleaning service to carry out your cleaning exercise if you have the hoover carpet cleaner.
If you need to clean your carpet, or it gets dirty quickly, then it is advisable to get a hover carpet cleaner to save you the cost of paying for professional cleaning services.
However, if you can’t afford a hoover carpet cleaner, you can as well borrow it or rent it to carry out the task you want it to perform. All you need to do is move your furniture to a safe place to avoid obstruction.
If you are here on this page, it means you want to know how to clean a rug or how to use a hoover carpet cleaner. Hence we’ve outlined a step-by-step guide to use a hoover carpet cleaner.
How Do I Use a Hoover Carpet Cleaner?
It’s not difficult to use the carpet cleaner. Be sure you’ve cleared the area you want to clean by removing furniture to avoid obstruction. You might have to move the table to another room or space as you don’t want the water to damage the furniture.
If it’s too heavy, you can use something to wrap the legs of your furniture so water doesn’t get into it. Just make sure you keep it away from moisture.
Begin cleaning
The first thing you need to do after moving the furniture is vacuum the whole place you will be cleaning. It will help if you vacuum the dust, dirt, debris, and pet hair.
Use your user manual to know the quantity of water to fill it in. If you don’t have the manual, you can check the hoover carpet cleaner website with your vacuum model to get information about it.
Proceed to fill the tank with hot water and mild detergent, mix them thoroughly after checking the manual for the correct setting, and slowly start moving it to the area you want to clean.
If you have tough stains, you can reverse over the same area more than once or do this to all the places you’ve cleaned to avoid leaving dirt in some rolls.
Time to Rinse
After cleaning the whole place with detergent, it’s time to rinse it with clean water. Empty the tank you filled with detergent water and fill it with clean water; I am sure you don’t want to leave detergent on your carpet.
Repeat the process you did earlier with the detergent water with the clean water filled in the tank. Slowly move to places you’ve cleansed before, use clean water to remove the detergent, and repeat this process to ensure you no longer have solutions on the carpet.
Then change the settings so it won’t continue spilling water on the floor after you’ve rinsed it properly. You can suction out the remaining water without squeezing the trigger of the cleaner; it would help you suck out as much water as possible.
Leave it dry
After the earlier process, leave your carpet to dry. Do not move in the furniture or walk on the carpet until it’s properly dry. You can also turn on the fan to fasten the drying process with an air dryer.
Try to wash your carpet at least twice a year to promote good hygiene. Ensure you clean away the stain immediately after it is on the carpet or rug. Cleaning your carpet at least twice a year and cleaning off stains immediately you spill on it makes it look as good as new.
Proper maintenance makes your property look new and lasts a very long time.
How to Use a Hoover Steamvac Carpet Cleaner
Using a hoover steam vac is relatively easy. It is similar to the earlier process of a regular hoover carpet cleaner; all you need to do is mix water and detergent into the tank.
Check your manual to know the quantity of water and detergent to mix depending on how large the area you want to clean is. Most times, the steamvac comes with various tools; you should choose the one you need.
Although, it is preferable to use a spin scrub head to get rid of tough stains on the carpet. The steamvac can also be used to clean the stairs and furniture.
How to Use a Hoover Power Scrub Carpet Cleaner
The power scrub carpet cleaner is similar to the regular hover carpet cleaner. Still, there is a significant difference between them: the power scrub has more cleaning brushes and can also spin 360 degrees, making it easy to clean a large area without consuming so much time.
Unlike the regular hoover carpet cleaner, the power scrub carpet cleaner performs more efficiently when cleaning tough stains and saving time.
Another feature of the Hoover power scrub carpet cleaner is that it makes work easier for you by rinsing the carpet as you use the detergent to wash it.
It rinses the carpet or rug as you are moving instead of waiting to soak the entire space before rinsing. It automatically mixes the soap and water without you measuring the quantity.
What should you do if your Hoover carpet cleaner loses suction while cleaning?
Empty the dirty water tank. Your carpet cleaner might lose suction or start making funny sounds when the dirt water is total. You can easily remove the dirty water tank by pressing down the handle at the top and emptying it. After opening it, rinse and replace it to continue cleaning.
Conclusion
It is important to note that a clean carpet naturally beautifies the home. Cleaning your carpet makes it very welcoming for guests and to you. Check out How to Deep Clean Carpet without Steam Cleaner and How to Clean Carpet Cleaner Brushes.